Slip into this far-out Foxy Lady Disco Costume, and you'll look ready for the ultimate dance party
In other words, I would serve this wine 'where the fun is' as a sort of accent or exclamation mark
As someone who's 5'0", I typically avoid dresses that hit right at the knee, but the heeled style of these booties helps lift and elongate the whole silhouette
Use milk or even water (about 1/4 - 1/2 cup) instead of buttermilk to thin dressing
Materials List: (2) 3/4" x 4' x 8' plywood (1) 1/4" x 4' x 8' plywood (4) 1 x 10 x 96" (2) 2 x 2 x 96" (19) *3/4" x 3/4" x 36" square wood dowels or (8) 3/4" x 3/4" x 96" (3) *18" drawer slides (8) *shelf support pins *2" #8 wood screws *1-1/4" pocket hole screws *2-1/2" pocket hole screws *iron-on edge banding *wood glue *circular saw or *table saw *miter saw *cordless drill *Kreg jig *speed square *edge banding trimmer *24" bar clamps *Behlen Pre-Stain Clear Wood Stain Base *Behlen Solor-Lux Stain - Cherry *Behlen Master Dye Toner - Dark Wanut *Mohawk Ultra-flo Clear Lacquer - satin *Behlen Rockhard Table Top Varnish - satin Cut List: (2) 3/4" plywood @ 73-3/4" x 20" (notched according to diagram) (2) 3/4" plywood @ 16" x 29-3/4" (2) 3/4" plywood @ 20 x 29-3/4" (1) 1/4" plywood @ 30-1/4" x 73-3/4" (2) 3/4" plywood @ 15-1/2" x 18" (3) 1/4" plywood @ 17-5/8" x 34" (approx.- measure opening before cutting) (6) 1 x 10 @ 18-3/8" (6) 1 x 10 @ 31" (approx.- measure opening before cutting) (21) 1 x 1 @ 35-7/8" (36) 1 x 1 @ 11-7/8" (2) 2 x 2 @ trapezoid cut at 15 degrees off square - 9-7/8" short end to short end (2) 2 x 2 @ trapezoid cut at 15 degrees off square - 13-7/8" short end to short end (8) 2 x 2 parallel, cut at 15 degrees off square, long end to short end 1
This one's already causing a stirour denim-washed babydoll dress launched and instantly took off
