MX5 NC RX8 Adjustable Front Upper Camber Arm Set (2x Non-Handed) GenV Notes: Only required if using

Notes: Only required if using the optional 0-5 V analogue outputs

The BlackBox is capable of multiple strategies and will accept PWM (Pulse Width Modulation) inputs as used for traditional boost control solenoids

The system will NOT work properly if it’s trying to push through the restrictive OEM venturi jet pump

NOTE: If 2 aftermarket pumps are required

Plugs directly into ECU PCB header

MX5 NC RX8 Adjustable Front Upper Camber Arm Set (2x Non-Handed) GenV Notes: Only required if usingFeatures: Adjustable from factory length to +40mm. Fit all NC & RX8 models direct bolt on to stock knuckle. Additional camber adjustment via the sliding ball joint. Chassis rail clearance to cater for lowered cars avoiding damage to control arm chassis. The narrow shape gives additional wheel clearance (for cars with increased steering angle) over other upper arms available. No trimming of chassis or bodywork required. Use OEM fitment bushes Add